 \[Command] show mirror \[Purpose] Show configuration related to mirror \[View] System view \[Use Cases] \[Command] mirror session id span \[direction {rx|tx|both}] {src-ethernet|src-vlan} port-name {dst-ethernet} port-name no mirror session id span \[Purpose] Create a mirror session or add port to the mirror session \[Parameter] \[View] System configuration view \[Use Cases] \[Command] mirror session id erspan \[direction {rx|tx|both}] {src-ethernet} port-name gre-src-ip A. B.

Mirror Configuration

 \[Command] show snmp-agent trap-target \[Purpose] Display SNMP trap server configuration \[View] System view \[Use Cases] \[Command] show snmp-agent source \[Purpose] Display the SNMP source address and port configuration \[View] System view \[Use Cases] \[Command] show snmp-agent user \[Purpose] Display SNMPv3 user configuration \[View] System view \[Use Cases] \[Command] show snmp-agent threshold \[Purpose] Display SNMP alarm threshold configuration \[View] System view \[Use Cases] \[Command] snmp-agent enable no snmp-agent enable \[Purpose] Enable SNMP function \[View] System configure view \[Use Cases] \[Command] snmp-agent community community name {RO|RW} no snme-agent community community name \[Purpose] Add SNMP community \[Parameter] \[View] System configuration view \[Usage Scenario] The community name like a password, and devices within the community use this name for authentication during communication.  Only devices with the same configured community name can access each other.

SNMP Configuration

 \[Command] syslog source-interface {etherent|loopback} interface-name no syslog source-interface \[Purpose] Configure the source interface for the device to send syslog packets \[Parameter] \[View] System configuration view \[Use Cases] \[Command] syslog ip-address no syslog ip-address \[Purpose] Specify the syslog server \[Parameter] \[View] System configuration view \[Usage Scenario] Syslog can be used to log messages locally in files or sent over the network to a syslog server.  The syslog server can centrally store syslog messages from multiple devices.

Syslog Configuration

 \[Command] show ipfix exporter \[Purpose] View ipfix exporter configuration \[View] System view \[Use Cases] \[Command] show ipfix monitor \[Purpose] View ipfix monitor configuration \[View] System view \[Use Cases] \[Command] show ipfix port-map \[Purpose] View ipfix port configuration \[View] System view \[Use Cases] \[Command] ipfix exporter name \[Purpose] Create ipfix exporter \[View] System configuration view \[Notes] Only one exporter can be configured globally \[Use Cases] \[Command] dip A. B.

IPFIX Configuration

 \[Command] exporter enable \[Purpose] Enable the Prometheus exporter feature \[View] System view \[Use Cases] 

Prometheus Exporter

Traffic Shaping

Network Management And Monitoring

delete-span-style

Routing & Gateway

Getting Started with VMware ESXi

Getting Started with Linux KVM

Preface

Applicable Hardware Models

VPP Router Overview of Router Functional Modules

First Use

System Configuration Guide

Interface Management Configuration Guide

PPPoE Interface Configuration Guide

MAC Configuration Guide

LAG Configuration Guide

VLAN Configuration Guide

MSTP Configuration Guide

QinQ Configuration Guide

MC-LAG Configuration Guide

MVRP Configuration Guide

DHCP Configuration Guide

NAT Configuration Guide

MAP Configuration Guide

BGP Configuration Guide

OSPF Configuration Guide

Policy Routing Configuration Guide

Security Configuration Guide

ACL Configuration Guide

QoS Configuration Guide

Network Monitoring Configuration Guide

Network Management Configuration Guide

User Access and Authentication Configuration Guide

Reliability Configuration Guide

TRACK and SLA Configuration Guide

VRRP Configuration Guide

IPSec Configuration Guide

WireGuard Configuration Guide

DNS Configuration Guide

Geosite/Geoip Configuration Guide

Reflect-acl Configuration Guide

Configuration Guide

Login System

Enter The Command Line Configuration Interface

Device Upgrade

System Boot Configuration

Basic Configuration

Device Status

Device Configuration

NTP Configuration

System Time Configuration

POE Configuration

Device Management

Interface Basic Configuration

Sub-interface Configuration

Loopback Interface Configuration

Port Group Configuration

Interface Bandwidth Utilization Alert

Interface Management

Link Aggregation Configuration

MC-LAG Configuration

LLDP Configuration

VLAN Configuration

MAC Configuration

Interface Isolation Group Configuration

STP Configuration

QinQ Configuration

MVRP Configuration

Ethernet Switching

IPv4 Configuration

ARP Configuration

ARP To Host Routing Configuration

DHCP Relay Configuration

DHCP Server Configuration

IPv6 Configuration

NAT Configuration

PPPoE Configuration

MAP Configuration

IP Service

Static Route-configuration

BGP Configuration

OSPF Configuration

Route Map

Policy Route Configuration

IP Unicast Routing

9-1-acl-configuration

9-2-network-traffic-security-inspection

9-3-dhcp-snooping-configuration

ND Snooping Configuration

User Binding Rule Configuration

IPv6 RA Guard Configuration

IPSG Configuration

SAVI Configuration

ARP Detection Configuration

Security Configuration

Priority Map Configuration

Traffic Regulation

Queue Scheduling

QoS Configuration

BFD Configuration

Monitor Link Configuration

VRRP Configuration

Reliability Configuration

Local User Configuration

AAA Configuration

License Configuration

User Access And Authentication

IPSec Configuration

DNS Configuration

WireGuard Configuration

Geosite/Geoip Configuration

Ucentral-client

Command Line Reference